42 Versitron Operation Manual
Restore copies the system files back from the USB drive. Select the machine
serial number and backup date from the drop down menu. You can select
which system files to restore: Configurations, Test Data and Calibration by
toggling the indicator On or Off. Hit Restore to pull the files from the USB drive.
(Calibration values can only be restored to the machine the same machine.)
The software will restart to apply the restored settings.
The File Screen provides an indication of Disk Usage (as % of capacity). The
user is also able to turn logging to DataView On or Off. (DataView is an off-line
data analysis package, sold by Newage for use with the Versitron). When
logging to DataView is enabled, all measurements are sent via serial
communication to an external computer running DataView (details of this
communication are explained in section 7.7 - DataView Output Specifications).
This connection is made via the USB B connector on the back of the console. A
driver for the USB device is shipped along with the machine and must be
installed prior to launching DataView.
To Next Page
Loading...
