44 Versitron Operation Manual
a. Hardness Scale
The Hardness Scale selection defaults to the current setting, with a drop down
list to select a different scale. The drop down list will only show the hardness
scales appropriate for the installed measurement hardware (Regular Rockwell or
Superficial.) If the Hardness Scale is changed, a series of screens will walk the
user through the required physical changes to the machine, see Section 5.5.
b. Time at Load
The Time at Load defaults to the current setting, with plus “+” and minus “-”
icons to adjust the time in 0.1 sec. intervals from 2 seconds up to 90 seconds.
To Next Page
Loading...
