Versitron Operation Manual 67
AT/5321 Shortened clamping shield (for Motorized)
AT/5322 Anvil adapter to fit 3/4” diameter anvil posts
AT/5401 Normal indenter shroud
AT/5402 Enclosed indenter shroud
AT/5404 Fully enclosed pointed nose indenter shroud for tapered
diamond
AT/5405 1.7” enclosed pointed nose indenter shroud
AT/5411 4” indenter shroud & clamping shield extension
AT/5412 1.7” penetrator, indenter shroud & clamping shield extension
AT/5413 1” indenter, indenter shroud & clamping shield extension
AT/5414 1.7” double tapered indenter, indenter shroud extension
AT/5415 1” double tapered indenter, indenter shroud extension
AT/5416 Fully enclosed clamping shield
Replacement Parts
AT-82T Locking knob on T Stands
AT-13TR Rubber elevating screw cover
AT-102T Anvil base adapter
AT-14T Yoke
AT-68T Yoke bearing
AT-48T Lever
AT-76T Head carriage height adjustment knob
AT-97T Top handle only (part of 76T)
AT130B Floor Cabinet. Holes are cut for elevating screw. Has one
drawer. Measures 24½”W x 28”D x 34”H.
Part # Regular Superficial Indenter/Ball Size
5106* - All N Scales Diamond
5107* C, A Diamond
5110 C, D
5111** B, F, G All T Scales 1/16”
5112** E, H, K All W Scales 1/8”
5113** L, M, P All X Scales 1/4”
* Tapered diamond for use with Indenter Shroud #5404.
** When ordering Ball Indenter, please supply test Head serial number to ensure proper fit. The serial number is
located on the silver capstan load wheel and on the label on the back of the head.
Diamond Ball Indenters
To Next Page
Loading...
