amiad ADI-P Quick Guide

ADI-P Quick Guide 910101-000990 / 04.2020 Page 2 of 4
Initial operation of the ADI-P Controller:
Open the cover of the ADI-P Controller by turning it counterclockwise [1] and insert four alkaline 1.5V AA batteries
[2]. The Power LED turns on and the ADI-P Controller starts operating according to its pre-defined default flushing
program; flushing at 0.5 bar DP signal or 4-hour time intervals.
Downloading the Mobile Application:
The free ADI-P application by Amiad Water Systems is available for download on Google Play (Android
version 5 and up) or the App Store (iOS version 9 and up).
Pairing the controller with your mobile phone:
1. Activate your phone’s Bluetooth® discovery mode and start the ADI-P application.
2. Select the applicable SYSTEM UNITS.
3. REGISTER your filter to create an account.
4. Click CONNECT. The application scans for controllers within Bluetooth® range.
5.
Select your controller from the list of controllers in range. Verify that the blue/green LED on your controller is
blinking before clicking YES to initiate the paring process
.
1
2

amiad ADI-P Specifications

General

Brand	amiad
Model	ADI-P
Category	Controller
Language	English