What to do if the Amibot Cleaning Equipment remote control does not work?
If the remote control for your Amibot cleaning equipment isn't working, the batteries may need replacing, or the remote control itself could be broken. Try changing the batteries first. If that doesn't work, you might need to replace the remote control.
Why does my Amibot Cleaning Equipment skid on glazed surfaces?
Your Amibot cleaning robot might skid on glazed surfaces because the window is too dirty, smooth, or damp, or the robot's microfibre cleaning pads are too dirty or damp. To resolve this, try placing the robot on another part of the surface, change the microfibre cleaning pads, and turn the robot off and back on again. Ensure there's a 10 cm clearance from obstacles before starting.
Why Amibot Glass XLine AGX50 does not attach to the surface?
If your Amibot cleaning equipment doesn't attach to the surface correctly after being switched on, there might be an issue with the motors or suction ventilators. Make sure the microfibre cleaning pads are securely attached and not restricting the rotating disks. Also, check that the screws on the rotating disks are well screwed in and not protruding. If the motors still don't work correctly, contact AMIBOT after-sales service.
Why does my Amibot Glass XLine AGX50 Cleaning Equipment beep once during use?
If your Amibot cleaning robot beeps once while in use, the motors may have detected a brief loss of suction. To address this, ensure the robot's safety tether is securely fastened to a safe place. You can also try moving the robot to a more adherent surface.
General| Category | Cleaning Equipment |
|---|---|
| Control | Remote control |
| Warranty | 2 years |
| Model | AGX50 |
| Type | Window Cleaning Robot |
| Cleaning Method | Wet |
| Power Source | Battery |
| Cleaning Width | 24 cm |
| Cleaning Path Width | 24 cm |
| Safety Features | Anti-fall sensor |
| Max Cleaning Speed | 15 m²/h |
| Water Tank Capacity | 300 ml |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
Lists all items included in the product package, with corresponding numbers.
Illustrates and labels the main components of the robot unit.
Details the functions and layout of the remote control buttons.
Instructions for attaching the microfibre cleaning pad holders and pads.
Steps for connecting the robot to the power adapter and mains supply.
Guidance on utilizing the 4m extension cord for power.
Procedure for attaching and securing the safety tether kit.
Instructions on how to prepare and use the microfibre cleaning pads.
Covers plugging the robot into the mains and switching it on.
How to position the robot on the surface to be cleaned.
Initiating the cleaning cycle using the robot or remote control.
Explains different cleaning modes like AUTO, AUTO Up, AUTO Left, AUTO Right, and Manual.
How to temporarily pause the robot's operation.
Procedures for ending the cleaning cycle or stopping the robot.
Instructions for cleaning and drying the microfibre cleaning pads.
Guide for wiping clean the robot's pad holders and disks.
Contact information for customer support and assistance in France.
Guidelines and precautions for safe and proper use of the appliance.
To Next Page