3
ACCESSORIES
ADJUST SCREW A
SCREW B
TRIM-KIT PLASTIC
COVER
BUILT-IN FURNITURE
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.
Electrical connection
The oven is tted with a plug and must be only connected to a properly installed ear-
thed socket. In accordance with the appropriate regulations, the socket must only be
installed and the connecting cable must only be replaced by a qualied electrician. If
the plug is no longer accessible following installation and all-pole isolating switch must
be present on the installation side with a contact gap of at least 3mm.
To Next Page
Loading...
