Amica AMMB20E1GI INTEGRA - Page 5

5
INSTALLTHEOVEN
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then install
the oven into the cabinet.
- Adjust the height of ADJUST SCREW A to keep 1mm gap between the ADJUST
SCREW A and the top plane of cabinet.
- Do not trap or kink the power cord.
- Make sure that the oven is installed in the center of the cabinet.
2. Open the door; x the oven to the cabinet with SCREW B at the INSTALLATION
HOLE of TRIM KIT. Then x the TRIM-KIT PLASTIC COVER to the INSTALLA-
TION HOLE.
A - ADJUST SCREW A
B - UPPER AIR TUNNEL
C - TRIM-KIT
D - ADJUST HEIGHT
E - ADJUST SCREW A
F - TRIM KIT
G - SCREW B
H - INSTALLATION HOLE
I - TRIM-KIT PLASTIC COVER
J - INSTALLATION HOLE