Amica SHC User Manual

13
After the work end time is reached, the oven
will turn off automatically, the sound signal will
turn on and the lamp at will flash again,
• set up the oven function and tem-
perature control knobs in turn-off
positions,
• press buttons 1, 2 or 3 to turn the
signal off; the lamp will go out, and
the display will indicate the current
time.
Notice!
You can check and correct programmed
set-ups at any time. You can not, however,
change the current time set-ups when the
programmer is in the semi-automatic or au-
tomatic operations.
SETTING UP POWER SAVING MODE
Programmer has a power saving function.
This function allows for blanking the display
while the programmer is showing current
time. After the display is blanked, the pro-
grammer is still measuring current time.
How to activate this function:
- Simultaneously press any two but
-
tons 1, 2 or 3 and hold for about 3
seconds, the display will go out.
How to deactivate this function:
- Press any button
1, 2 or 3, the dis-
play will show current time.
Notice!
The saving mode function cannot be used if
the timer has been set or if the programmer is
in semi-automatic or automatic mode.
OPERATION
2 1
3

Amica SHC Specifications

General

Number of burners	4
Oven type	Electric
Energy efficiency class	A
Height	85 cm
Depth	60 cm
Number of cooking zones	4
Residual heat indicator	Yes
Timer	Yes