Need help?Do you have a question about the Amina S and is the answer not in the manual?
General| Brand | Amina |
|---|---|
| Model | S |
| Category | Battery Charger |
| Language | English |
amina S is for charging electric vehicles with non-gassing batteries, requiring secure mounting and operation within specified parameters.
Connect the charging cable to your electric vehicle. A blue light indicates charging.
Refer to vehicle documentation. Cable remains locked until process completion or vehicle stop.
For information on connecting your charger or smart charging, visit aminacharging.com/smart.
The charger does not have power.
Current wheel is in position 0. Wireless settings have been reset.
No car is connected.
The car is connected, but no power is delivered.
Charging (power delivered).
Unsupported installation of electrical wiring.
The charger is updating its firmware.
DC leakage detected. Connect vehicle again or try another vehicle. Contact installer if error persists.
Unplug charger and reconnect. Contact installer if error persists.
Charger detected an error. Unplug and reconnect. Contact installer if error persists.
Relay malfunctioned. Critical error requiring replacement. Turn off power before touching.
Details dimensions, operating temperature, and weight of the product and charging cable.
Specifies supported power grids and AC voltages for single and three-phase connections.
Information on charging cable mode, type, and minimum bending radius for different currents.
Details the maximum charging power output for 20A and 32A cables in single and three-phase.
Specifies the integrated residual current protection (RDC-DD) according to IEC 62955.
Covers resistance to impact, dust, water, and flammability ratings (IP54, IK08, UL94).
Specifies protection class I and overvoltage category III (4 kV) for electrical safety.
Lists compliance with Radio Equipment Directive, RoHS, and various EN IEC standards.
Details integrated 3-phase energy measurement with +/- 3% accuracy.
Specifies frequency band, max output power, and supported communication interfaces (Bluetooth LE, Zigbee).
Specifies required external circuit breaker, RCD type, cable diameter, and wire cross section.
The amina S comes with a five-year warranty handled by your amina dealer.
This user guide is available in multiple languages at download.aminacharging.com.
To Next Page
