4.6.2 Check and change the oil in your machine regularly.
This will avoid all problems related to the oil being too
low, too high, dirty or thick.
4.6.3 SAE I OW-30 oil is recommended. The SAE viscosity
grade shows other viscosities to use in different average
temperatures.
4.5.3 If the oil level i s below the minimum level add oil to
its proper level. We recommend the oil is in the middle of
minimum and maximum levels.
-10 O 10 20 30 40L'
Always check the API SERVICE label on the oil container to
be sure it includes the letters SE.
4.6.2 Check and change the oil in your machine regularly.
This will avoid all problems related to the oil being too
low, too high, dirty or thick.
To Next Page
Loading...