22
8.6.1 Put a gasoline container below the carburetor and
use a funnel to protect against over spilling.
8.6.2 Loosen carburetor discharge bolt. Discharge any remaining
fuel in the carburetor.
8.6.3 After discharging of all fuel into a container re tighten the
discharge bolt.
8.6.4 Put the container under the sedimentation glass and
use a funnel to protect against over spill. 8.6.5 Dismantle
sedimentation glass and turn fuel valve to the "on" position.
Discharge fuel and remove sedimentation glass.
protect spilled
Drainage bolt
8.6.5 Dismantle sedimentation glass and turn fuel valve to the
"on" position. Discharge fuel and remove sedimentation glass.
ATTENTION: When using the AMP Triad 3 in 1 and you
hear unfamiliar noises coming from the unit it is
To Next Page
Loading...