EasyManua.ls Logo

Ampeak UL458 - Page 11

Ampeak UL458
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DONOT make any electrical connections or disconnections in areas designated as
ignition protected. This unit is NOTapproved for ignition-protected areas.
Connect the unit to a power source with a normal output of 12v DCONLY.6Vbattery
voltages are too low and 24Vbattery voltages are too high, which will damage the unit.
DONOT use the inverter in temperatures above 140F(-100C) 1040F(400C).
DONOT expose this product to water, rain, snow, condensation, or spray.
DONOT connect the unit to live AC power circuits or there will be damage to the
inverter.
DONOT connect any ACdevice which has its neutral conductor connected to the ground
to the unit.
DONOT use the inverter with medical devices since it is not approved for medical
applications.
DONOT permanently install the unit in the engine compartment. Certain chargers for
small nickel-cadmium batteries can be damaged if connected to the inverter.
DONOT use the inverter beyond its rated wattage capacity. Add the total watts of all
connected appliances and be sure the total is lessthan the inverter's capacity.
This product may contain one or more chemicals known to the state of California to
cause cancer and birth defects or other reproductive harm. Wash hands thoroughly
after handling.
NOTE:
f you are unsure about using your rechargeable appliance with the inverter, contact the
Ampeak: customer-services@ampeak.com to determine the rechargeable appliances'
compatibility with the inverter.