1
2
Find a location for installation
Connect the Pro Access Point to your Router or Network Switch
Open the lid of the Pro Access Point and check
that the PoE cable is securely fastened to the
port.
Locate the PoE Adapter and connect the 30 ft
PoE cable to the port on the PoE
adapter.
AP
Locate the power adapter and connect one
end to a power outlet and the other end to
the port on the PoE adapter.
Locate the shorter network cable and connect
one end to the port on the PoE adapter and
the other to your router's network (LAN) port,
or a network switch.
PWR AP NETWORK
InternetModemRouter
(LAN Port)
d
AP600EX
Allow up to two (2) minutes for the Pro Smart Access Point to
automatically configure itself to your network.
Note: If your network uses static IP address assignments, you will need to manually configure the settings for your
Pro Smart Access Point. See the instructions on the back to access the configuration menu of the Access Point.
The instructions below are optional. You may now use your Pro Access Point without any additional
configurations. However, if you wish to change any settings (such as network ID and security) for the Pro
Access Point, follow the instructions below to access the configuration menu of the Access Point.
!
7
Setup Summary
Open your Web Browser
If the URL fails to open, then try: http://192.168.1.240
http://setup.ampedwireless.com
Enter the setup web address into your browser:
2
6
Wireless Network Security
The default Security Key (WPA) of your
wireless network is: wireless
To change it, enter a new key in the Secu-
rity Key field. The key must be at least 8
characters long.
Click Next to apply your settings.
The Pro Smart Access Point will reboot. This
process may take up to 2 minutes. The page
will automatically reload after the count-
down. If it does not, you may need to
reconnect to the Access Point and refresh
the page manually.
4
Set the System Clock Time
The System Clock is used for system logs
and setting schedules for Internet access.
Click Sync to synchronize the System Clock
with the time on your computer.
Click Next to continue.
The Setup Summary provides you with
information regarding your current settings.
If you have wired network devices, you may
attach them to the wired ports on the back
of the Pro Smart Access Point for additional
wired connectivity.
If you have any questions during the setup process
please contact Amped Wireless support department:
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
The ID of your Wireless Network is:
Amped_Pro_AP
To change it, enter a new name in the SSID
field. Users connecting wirelessly to the Pro
Access Point will use this ID to identify your
wireless network.
Click Next to continue.
5
Wireless Network ID
3
Welcome to the Smart Setup Wizard
The Smart Setup Wizard will guide you
through the following settings:
System Clock
Wireless Network SSID
Wireless Network Security Key
Click Start to begin.
1
2
3
1
Optional Configurations: Accessing the Settings Menu
Scan for available wireless networks on your
PC and connect to the following network:
NETWORK ID: Amped_Pro_AP
PASSWORD: wireless
Amped_Pro_AP
You can NOT access the Settings Menu with a wired connection.
The Settings Menu may ONLY be accessed through a computer with a
wireless connection to the Pro Access Point.
!
3
Connect your Computer to the Pro Smart Access Point
Wired Connections:Wireless Connections:
Scan for available wireless networks on your
PC and connect to the following network:
Attach any Wired Devices to the
Pro Access Point using an
Ethernet cable.
NETWORK ID: Amped_Pro_AP
PASSWORD: wireless
or
Network Switch
CO N G RAT U L ATI O N S, Y O U’ R E D O N E!
INDOOR SETUP
InternetModemRouter
(LAN Port)
OUTDOOR SETUP
InternetModemRouter
(LAN Port)
See back side for mounting instructions.
View the package insert for instructions on how to optimally position the Pro Access Point.
POE
POWER
Note: If you plan to use your own network cable, ensure
that the cable is a Non-PoE cable to avoid power conict issues.
— R E A D F I R S T —
SETUP GUIDE
High Power Wireless-N 600mW Pro Access Point
Need Help? Give us a call.
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
?
To Next Page
Need help?
General
