g) Plug in the High Power USB Adapter
After the computer has fully rebooted, locate two
available USB ports and insert the USB Adapter.
Windows should automatically begin installing the
driver for use with the USB Adapter. If only one USB
port is available, insert the USB connector labeled
Primary.
h) Connect to a Wireless Network
Locate the Wireless Icon on your Windows desktop
(located on the bottom right corner) and click it to
view available wireless networks. Highlight your
desired network and click Connect.
If the network you are trying to connect to is secure,
you will be prompted to enter the security key. If you
have any problems connecting to the network have
windows diagnose the connection.
To Next Page
Loading...
