Ampeg Opto Comp Quick Start Guide

Technical Specifications
Visit WWW.AMPEG.COM to...
(1) ...identify WARRANTY coverage provided in your local
market. Please keep your sales receipt in a safe place.
(2) ...retrieve a full-version, printable OWNER’S MANUAL
(English only) for your product.
(3) ...REGISTER your product.
(4) ...CONTACT Technical Support, or call 818-575-3600.
WARRANTY AND SUPPORT
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Part No. 40-00-0433 Rev. A
Signal-to-Noise Ratio
(100 Hz @ 1.00V RMS)
82 dB
Maximum Gain +14 dB
Power Requirements Internal: 9V Battery
External: 9V DC, ≥25mA
Size (H x W x D) 2.2 x 2.6 x 4.5 in
56 x 66 x 114 mm
Weight 0.6 lb / 0.3 kg
All specifications subject to change
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg and the Ampeg logo are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

Ampeg Opto Comp Specifications

Power

internal power requirement	9V Battery
external power requirement	9V DC, ≥25 mA, center negative

Audio Specifications

signal-to-noise ratio	80 dB
maximum gain	+14 dB
compression ratio minimum	1:1
compression ratio maximum	10:1
release time minimum	75 milliseconds
release time maximum	600 milliseconds
output level gain	Mute to +14 dB

Impedance

input impedance	1 M @ NORMAL
input impedance with pad	166 k w/–15 dB PAD
output impedance	200

Weight and Dimensions

size	2.2 in x 2.6 in x 4.5 in, 56 mm x 66 mm x 114 mm
weight	0.6 lb / 0.3 kg