Ampex 351 - Page 103

CARRYING CASES AND CONSOLES
Carrying Cases
Tape Transport Carrying Case
The portable tape transport carrying case.
Catalog No. 03-0154-01, is specially designed
to house the 354 tape transport. A special door
on the side of the case is provided for all neces 
sary interconnections between the tape trans 
port and the electronic assembly and allows the
tape transport to be operated in either a horizon 
tal or vertical position. Special ducting in the
case is designed to provide adequate ventilation.
Air circulation within the case is such that the
equipment actually runs cooler in the case than
in free air.
Electronic Assembly Carrying Case
The portable electronic assembly carrying
case, Catalog No. 15-0211-00, is specially de
signed to house the 354 electronic assembly. All
necessary interconnections are provided for by
removing the rear panel from the case.
Console
Console
Assembly
The console assembly, Catalog No.
15-0214-00, is designed to house the 354 tape
transport and electronic assembly as a complete
and easy-to-operate unit. Facilities for easy
maintenance of the equipment are provided.