EasyManua.ls Logo

AmpliVox Otowave 102 - 11.3. Calibration and Repair of the Instrument

AmpliVox Otowave 102
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM001-16 Otowave 102 Operating Manual Page 25
See Sections 7 and 8 for further information on printing a record or sending
it to a computer.
9.2. Delete records
DELETE RECORDS allows a group of records to be deleted. It is possible
to delete all records, all records that have been printed or all records that
have been sent to a computer.
Confirmation of the deletion is required.
9.3. Print records
PRINT RECORDS allows a group of records to be sent to the printer. It is
possible to print all stored records or just those records that have not
already been printed. Refer to Section 8.1 for more general information. If
printing the entire database it is recommended that a full roll of paper is
loaded into the printer.
9.4. Send records to a computer
SEND RECORDS TO PC allows a group of records to be sent to a
computer. It is possible to send all stored records or just those records that
have not already been sent. Refer to Section 8.2 for more general
information.
10. Performing Daily Checks
The operation of the Otowave 102 should be checked daily using the 4 in 1
test cavity assembly supplied with the instrument.
Select the DAILY CHECK option in the main menu:
DAILY CHECK
Volume: Open
Cancel
Wait until “Open” is displayed.

Related product manuals