To Next PageTo Next Page
Need help?Do you have a question about the Amrotec X-1000 and is the answer not in the manual?
General| Counting Speed | 1000 notes/min |
|---|---|
| Stacker Capacity | 200 notes |
| Display | LCD |
| Weight | 5.5 kg |
| Power Consumption | 60W |
| Counterfeit Detection | UV, MG |
| Detection Methods | UV, MG |
| Power Supply | AC 110V/220V, 50-60Hz |
Defines abbreviations and acronyms used in the manual.
States compliance with FCC rules and conditions.
Lists safety precautions to avoid hazards and injuries.
Provides warnings to avoid electrical shock, fire, or damage.
Warns about accidental operation and precautions.
Provides a visual overview of the X-1000 machine components.
Details the control panel layout and its keys.
Explains the information displayed on the TFT color screen.
Instructions on how to turn the X-1000 device on and off.
Guidelines for correctly placing banknotes in the hopper.
Describes how two users can operate the machine simultaneously.
How to select the desired currency for counting.
How to switch between Auto and Manual start modes.
Explains the cumulative counting feature (Add mode).
Instructions for adjusting counting speed in CNT mode.
Instructions on setting batch counting by pieces and clearing settings.
How to use the Count Mode and adjust density settings.
Explains the different currency discriminating counting modes.
Instructions for printing counting results, grand total, and day total.
Steps to clear error messages displayed on the screen.
Details various error message codes and their meanings.
Guide to enter setting mode and navigate menus.
Configuration for key tones, warning alarms, and suspicious note alerts.
How to enable or disable counterfeit detection.
Settings for printer port, paper size, and baud rate.
Setup for printer type and FACE sorting modes.
How to configure ORIENT sorting modes (SINGLE, ALL, OFF).
Setting up serial number output mode and format.
Instructions to set the device's date and time.
How to open the top and bottom bill paths for access.
Instructions for weekly surface and quarterly bill path cleaning.
