MST-431/MSD-431-L Features
11
MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels
Configuration
The MST-431 and MSD-431-L are equipped with Settings Pages that allow you to set and configure various
features on the panels. For more information on connecting and configuring the touch panels to a network,
please refer to the Modero S Series Programming Guide, available at www.amx.com.
Bluetooth Support
Both the MST-431 and the MSD-431-L allow the use of Bluetooth keyboard and mouse combinations, using
HID Profile v1.1. Using a keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB
Adaptor (FG5968-19).
Cleaning the Touch Overlay and Case
Both the MST-431 and the MSD-431-L come with the MXA-CLK Modero X Series Cleaning Kit (FG5968-
16), which may be used to clean fingerprints and dirt from the device. This kit comes with cleaning cloths and
a bottle of cleaning fluid specifically for use with the device.
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and
then apply the cloth to the touch screen. Do NOT use abrasives of any type to clean the device, as abrasives
may permanently damage or remove the device’s finish.
To Next Page
Loading...
Need help?
General
