Firmware Pages and Descriptions
119
VG Series Modero Touch Panels
Time & Date Settings Page
The Time & Date Settings page (FIG. 104) allows you to alter/set the time and date information on the NetLinx Master.
If either the Time/Date is modified on this page (then updated to the Master by pressing the Set Time button), all devices
communicating to that target Master will then be updated to reflect the new information.
The elements of the Time & Date Settings page are described in the table below:
Project Information Page Elements (Cont.)
File Revision: Displays the revision number of the file.
Dealer ID: Displays the dealer ID number (unique to every dealer and entered in TPD4).
Job Name: Displays the job name.
Sales Order: Displays the sales order information.
Purchase Order: Displays the purchase order information.
Build Number: Displays the build number information of the TPD4 software used to create the project file.
Creation Date: Displays the project creation date.
Revision Date: Displays the last revision date for the project.
Last Save Date: Displays the last date the project was saved.
Blink Rate: Displays the feedback blink rate (10th of second).
Job Comments: Displays any comments associated to the job. These comments are taken from the TPD4
project file.
FIG. 104
Time and Date Settings page
Time Display
fields
Date Display
fields
Currently
selected
The only way to modify a panel’s time, without altering the Master, is to use NetLinx
code.
Time & Date Settings Page Elements
Back: Returns you to the previously active touch panel page without saving changes (to save
changes, use the Set Time button).
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
the panel’s connection status regardless of what page is currently active.
A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
Time Date Refresh/Set: This section provides you with two options:
• The Get Time/Date button retrieves the Time and Date information from the Master.
• The Set Time/Date button sets the Master to retain and save any time/date modifications
made on the Time and Date Setup page.
Time Display fields: These fields display the time in three formats: STANDARD, STANDARD AM/PM, and 24
HOUR.
Date Display fields: These fields display the calendar date information in several different formats.
To Next Page
Loading...
