Displaying Stream Content
157
VG Series Modero Touch Panels
14. Click the Apply button to save the encoding profiles to the MAX-CSE.
Step 3: Configuring the MAX-CSE audio/video inputs
1.
Complete the MAX-CSE connection and wiring procedures outlined within the Wiring the MAX-CSE connectors
and cables section of the MAX-CSE Instruction Manual.
2. Access the A/V Setup page (FIG. 134) by clicking the A/V Setup link from within the Navigation frame. This page
provides the user with the ability to select the source of the incoming video signal (from either the rear Composite
or S-Video port), the format of the incoming video (NTSC/PAL), and the gain given to the incoming audio signal.
FIG. 133 Stream Profiles page (showing a sample configuration)
These port values must use
even numbers
If using RTP, both the Target Port and Target Audio Port must be different and
should use even numbers.
FIG. 134 A/V Setup page
Video Port and Video Format
Mic Gain value for incoming
audio signal
To Next Page
Loading...
