EasyManua.ls Logo

AMX NXD-1200VG - MDC; Sav; Sho; Skt

AMX NXD-1200VG
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programming
186
VG Series Modero Touch Panels
"^" Button Commands (Cont.)
^MDC Turn On the ’Mouse double-click’ feature for the virtual PC.
Syntax:
"'^MDC'"
Example:
SEND COMMAND Panel,"'^MDC'"
Sets the mouse double-click for use with the virtual PC.
^SAV Saves the current configuration values.
^SHO Show or hide a button with a set variable text range.
Syntax:
"'^SHO-<vt addr range>,<command value>'"
Variable:
variable text address range = 1 - 4000.
command value = (0= hide, 1= show).
Example:
SEND_COMMAND Panel,"'^SHO-500.504&510.515,0'"
Hides buttons with variable text address range 500-504 & 510-515.
^SKT Receive touch information on specified socket.
Syntax:
'^SKT-<0=disable socket, greater than 1023=enable socket on specified port>
Only socket values equal to or greater than 1024 are valid. The panel will open up a TCP listening socket
on the port specified. User or 3rd party program can connect to the panel using this port/socket number
and receive touch/release/move strings. By default, the panel disables touch notifications on startup.
Format of the output is:
<Press/Release/Move>,<x-coordinate>,<y-coordinate>
Example:
SEND_COMMAND TP, '^SKT-7425' (enables touch notifications on socket 7425)
SEND_COMMAND TP, '^SKT-0' (disable touch notification)
^STO Set the shutdown timeout. Returned in Custom event.
Variable:
Value1=shutdown timeout value (in minutes)
^TEC Set the text effect color for the specified addresses/states to the specified color. The Text Effect is
specified by name and can be found in TPD4. You can also assign the color by name or RGB value
(RRGGBB or RRGGBBAA).
Syntax:
"'^TEC-<vt addr range>,<button states range>,<color value>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
color value = Refer to theRGB Values for all 88 Basic Colors table on page 166.
Example:
SEND_COMMAND Panel,"'^TEC-500.504&510.515,1&2,12'"
Sets the text effect color to Very Light Yellow on buttons with variable text 500-504 and 510-515.

Table of Contents

Other manuals for AMX NXD-1200VG

Related product manuals