Touch Panel Accessories
14
VG Series Modero Touch Panels
Product Specifications
NXA-AVB/RGB Specifications
Dimensions (HWD): • 1.52" x 5.54" x 4.93" (3.86 cm x 14.07 cm x 12.52 cm)
• Width when attached to mounting ears: 6.65" (16.86 cm)
Power Consumption: • 240mA
• Routed through AVB using a 12 VDC-compliant power supply
Certifications: • FCC Part 15 Class B, CE, and EN60950
Features: • Accepts either Composite or S-Video inputs (1200V or VG-Series panels)
• Accepts RGB or Component inputs
• Integrates USB Type-B connector for keyboard and mouse communication from the panel
through to the PC
• Accepts 6-wire stereo audio with 4-wire microphone output
• Provides video/audio distribution to the video-capable panels over CAT5 cable up to 200 ft.
(60.9 m)
• Provides audio distribution to audio-capable touch panels over a CAT5 cable up to 200 ft.
(60.9m)
• Routes RGB and computer control pass-thru signals to/from a Modero panel up to 200 ft.
(60.9 m)
Availability: • This unit is included with VG-Series panels using RGB Kits and as part of the NXA-
RGBKIT upgrade kit.
Front Components: • 2-pin 3.5 mm mini-Phoenix connector for power to the touch panel
• Green LED provides an indication of both power and activity
- 1 blink/second indicates the unit is powered and active
- Multiple blinks/second indicates there is currently an activity in progress, such as a
download. Do not unplug the unit during this process.
• RJ-45 connector provides Ethernet signals to the touch panel
• RJ-45 connector provides differential audio/video signals between the touch panel and the
box. This connector routes Composite video, Stereo (left/right) audio, and microphone
audio.
• RJ-45 connector provides RGB/Component video signals (being routed from the rear
RGB/Component input ports) and touch control information to the RJ-45 RGB connector
on the NXA-RGB card (installed within the panel). This connector routes VGA and
Component video signals.
Rear Components: • 4-pin 3.5 mm mini-Phoenix connector for out-bound audio (from microphone)
• 6-pin 3.5 mm mini-Phoenix connector for in-bound (left/right channel) audio
• HD-15 D-Sub RGB/VGA/Component connector used to route an RGB (computer) or
Component (DVD/HDTV) signal to a target Modero panel (using the internal NXA-RGB
card).
• Type-B USB device port input connector for pass-thru computer control (by connecting an
external keyboard or mouse device for use with different PC applications). The touch
signals are routed to the touch panel via the front RGB RJ-45 connector. Touch information
is sent to and from the panel via this two-way connector.
• 2-pin 3.5 mm mini-Phoenix connector for in-bound power (from a 12 VDC-compliant power
supply)
• RJ-45 connector for Ethernet input from the control system
• BNC connector (female) for Composite or Chroma (COMP/Y). Composite NTSC, PAL and
SECAM video is provided via this connector.
• BNC connector (female) for luminance (C).
Included Accessories: • 4-pin 3.5 mm mini-Phoenix connector (41-5047)
• 6-pin 3.5 mm mini-Phoenix connector (41-5063)
• Rack Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
• Two 2-pin 3.5 mm mini-Phoenix connectors (41-5025)
Other AMX Equipment: • AC-RK Equipment Rack Kit (FG575)
• NXA-MTC/RGB Combo Table Top cable (CA2250-70)
• NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80)
To Next Page
Loading...
