Firmware Pages and Descriptions
101
Modero VG Series Touch Panels - Instruction Manual
Firmware Pages and Descriptions
Overview
This section describes each firmware page and their specific functional elements.
Setup Navigation Buttons
The Setup Navigation Buttons (FIG. 100) appear on-screen when the Setup page is active.
These Navigation Buttons are specific to these Modero panels and include the specific elements described in the following table:
FIG. 100
Setup Navigation Buttons
Setup Navigation Button Elements
Protected Setup: Press the Protected Setup button to access the Protected Setup page section that provides access to the panel’s
sensors, calibration features, and connection settings.
• Refer to the Protected Setup Navigation Buttons section on page 116 and Protected Setup Page section on
page 117 for more detailed information.
Information: Pressing this button opens a slideout menu that displays two buttons: Panel Information and Project Information.
Press the Panel Information button to access the Panel Information page and view panel specific information such as
resolution, memory, etc. (read-only). Refer to the Panel Information Page section on page 103 for more detailed
information.
Press the Project Information button to access the Project Information and view the TPD4 project file properties
currently loaded on the selected panel (read-only). Refer to the Project Information Page section on page 104 for more
detailed information.
Time: Press the Time button to access the Time & Date Settings page, where you can alter the time and date settings on the
Master.
• Refer to the Time & Date Settings Page section on page 105 for more detailed information.
Audio: Press the Audio button to access the Audio Settings page, where you can alter the audio parameters on the Modero
panel.
• Refer to the Audio Settings Page section on page 106 for more detailed information.
Video: Press the Video button to access the Video Settings page, where you can set the video properties for incoming video.
• This button only appears on Color Video (CV) capable touch panels.
• Refer to the Video Settings Page section on page 107 for more detailed information.
Battery Base: Press the Battery Base button to access the Battery Base page, where you can modify and monitor NXT-BP Modero
Power Pack parameters.
• This button only appears when a Modero Table Top panel (NXT) is connected to an NXA-BASE/B battery base.
• Refer to the Battery Base Page section on page 114 for more detailed information.
Modero Setup
Navigation Buttons
To Next Page
Loading...
