Touch Panel Accessories
21
Modero VG Series Touch Panels - Instruction Manual
Touch Panel Accessories
Overview
The following section outlines and describes both the included accessories and other AMX equipment available for both the Video
and Video/RGB models of touch panels.
NOTE: When working with firmware, it is important to note that version 1.xx of firmware should only be loaded onto box’s using 1.xx
series firmware. The version 2.xx f irmware should only be loaded onto box's running 2.xx series firmware. To conf irm the box’s
current f irmware version, you can either navigate to the BOB Version f ield on the RGB Adjustment page or launch NetLinx Studio and
open the Online Tree tab. Modero-VG touch panel f irmware 2.60.27 or higher is required to download v2.xx firmware into the break
out box.
NXA-AVB/RGB Breakout Box (FG2254-11)
The NXA-AVB/RGB Ethernet/RGB Breakout Box allows any of AMX’s VG-Series Modero Touch Panels to accept and display both RGB
or HDTV Component signals directly from an external source. Through this single connection point, the 12”, 15” and 17” VG-Series
Modero panels experience comprehensive connectivity for audio/video distribution, power, Ethernet connectivity, and RGB. FIG. 2
shows the NXA-AVB/RGB Breakout Box.
The NXA-AVB/RGB Breakout Box is available either separately or as part of AMX’s exclusive RGB Kit (NXA-RGBKIT). The RGB
Breakout Box (combined with the panel’s internal NXA-RGB interface card) allows the Modero to accept and display high-
bandwidth and high-quality RGB and HDTV Component video signals. The NXA-AVB/RGB stands out amongst all previous AMX
Breakout Boxes in that it is firmware upgradeable, feeds high quality video signals via RJ-45 cables, and provides keyboard and
mouse pass-through functionality via the rear USB connector.
NOTE: If the PWR/Activity LED (on the front of the unit) is blinking rapidly, this indicates there is currently an activity in progress
(such as a download). DO NOT unplug the unit during a download as long as the LED is blinking in this manner.
Product Specifications
FIG. 2 NXA-AVB/RGB Breakout Box (front and rear views)
NXA-AVB/RGB Specif ications
Dimensions (HWD): • 1.52" x 5.54" x 4.93" (3.86 cm x 14.07 cm x 12.52 cm)
• Width when attached to mounting ears: 6.65" (16.86 cm)
Power Consumption: • 240mA
• Routed through AVB using a 12 VDC-compliant power supply
Certifications: • FCC Part 15 Class B, CE, and EN60950
Features: • Accepts either Composite or S-Video inputs (1200V or VG-Series panels)
• Accepts RGB or Component inputs
• Integrates USB Type-B connector for keyboard and mouse communication from the panel through to the PC
• Accepts 6-wire stereo audio with 4-wire microphone output
• Provides video/audio distribution to the video-capable panels over CAT5 cable up to 200 ft. (60.9 m)
• Provides audio distribution to audio-capable touch panels over a CAT5 cable up to 200 ft. (60.9m)
• Routes RGB and computer control pass-thru signals to/from a Modero panel up to 200 ft. (60.9 m)
Availability: • This unit is included with VG-Series panels using RGB Kits and as part of the NXA-RGBKIT upgrade kit.
Power
(front)
RGB (to internal NXA-RGB card)
Audio/Video
Power
S-Video Chroma
Composite/
Mic Out
Audio
In
Ethernet In
S-Video
Luma
(rear)
(to panel)
RGB/Component
In
USB
(to panel)
Ethernet
(to panel)
To Next Page
Loading...
