AMYET S8 - Page 14

AMYET
ASSEMBLY
1. Handlebars
Use a screwdriver to twist the 4 screws of
the driving rod;
2.Headlight
Take out the headlight, open the patch on
both sides of the headlight, and put the
headlight with one end of the line down
and the other end up;
12
S8 E-bike
Pick up the handlebars to fix the position,
adjust the Angle, tighten the 4 screws, pay
attention to lock the screws to prevent
loosening;
Take out the screw and gasket, remember
to put the gasket first and then the screw,
and lock it with a screwdriver;