SAFETY PRECAUTIONS
To prevent personal injury or damage to vehicles and/or the scan
tool, read this instruction manual first and observe the following
safety precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Do not attempt to operate or observe the tool while driving a
vehicle. Operating or observing the tool will cause driver distrac
tion and could cause a fatal accident
Wear safety eye protection that meets ANSI standards
Operate the vehicle in a well ventilated work area: Exhaust gases
are Poisonous
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the parking
brake is engaged
Keep the scan tool dry, clean, free from oil/water or grease. Use a
mild detergent on a clean cloth to clean the outside of the scan
tool, when necessary.
ABOUT BM500
1. Coverage
1) BM500 supports for BMW, Mini and Rolls-Royce brand cars. It
works on all the systems such as engine, transmission, ABS and
airbag etc.
2) Supports OBDII/EOBD Modes of operation
2. Product specification
• 2.4" 240x320 pixels LCD screen.
• Operating Voltage: 8V-18V
• Operating Temperature: OOC-600C(32-1400F)
• Storage Temperature: -200c-700c(4-1580F).
EN
To Next Page
Loading...