2.2.3 Erase Fault Codes
Choose [Erase Fault Codes] then press [0K] button as follows:
Select Function
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
Information
Erase fault codes!
Are you sure?
0K ESC
You need to press [0K] again to clear the fault codes, or you can
press [ESC] button to give up clearing fau t codes, as follows:
Version Information
Erase fault codes had success
Please wait 10 seconds, Turn ignition
off and Switch on again
Read fault codes to verify
0K
2.2.4 Read Datastream
ESC
Choose [Read Datastream] then press [0K] button as follow:
Select Function
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
6
To Next Page
Loading...