ECM
Menu selection
- Engine Control Module(CDl
Select [Version Information],it display as belows:
Select Function O I-Version Information
-version Information
02-Read Fault Codes
MB 530779
03-Erase Fault Codes
Supplier: Bosch
04-Read Datastream
Hardware Status:33/98
Software Status:20/99
Diagnosis Ident: 1/06
Select [Read Fault Codes], it will show as follows:
Select Function
01-version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
0K ESC
02-Read Fault Codes
Current and stored 1/10
p 1188 High - Pressure PumpElement
Shut - Off Valve Y73
ESC
Select [Erase Fault Codes],it display as belows:
Select Function
01-version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
Information
Erase fault codes had Success
Please wait 10 seconds, Turn ignition
Off and Switch on again. Read fault
3/4
codes to verify
0K
7
ESC
EN
To Next Page
Loading...