3 OBDII Diagnose
Choose [OBDII ] and it displays as follows :
ETcs
For Ford
Setup
3
BMS
Select System Diagnose
JIB50 vpw
J1850 PWM
IS0157654 CAN (llbit)
IS015765-4 CAN (29bit)
IS014230-4 KWP
IS014230-4 KWP(5BPS)
Isog141
processing
[fail]
[faill
3.1 Read Codes
1. Select [ Read Codes ] , then press [0K]
Diagnostic Menu
ea o es
Erase Codes
11M Readiness
Data Stream
Vehicle Information
1/5
If there are no Diagnostic Trouble Codes present, the display
indicates "No (pending) codes are stored in the module!" Wait a
few seconds or press any key to return to the Diagnostic Menu.
EN 12
To Next Page
Loading...