Select Function
Read ault Code
Erase Fault Codes
Read Datastream
2.1.2 Erase Fault Codes
Read Fault Codes
1/55
Coolant Temperature Relapsed
Lower Than Diagnostic
Monitoring Temperature
ESC
Choose [Erase Fault Codes] then press [0K] button, screen
displays as follow:
Information
Erase fault codes!
Are you sure?
0K ESC
You need to press [0K] again to clear the fault codes.
It shows as follow after clearing the fault codes.
Information
Erase fault codes had Success.
Please wait 10 seconds. Turn
ignition off and Switch on again
Read fault codes to verify.
0K ESC
If you give up clearing fault codes, please press [ESC] button.
7 EN
To Next Page
Loading...