Andis RACA-2 - Clipping Guide

4
Before starting clipper remove blade guard. Plug cord into electrical outlet, operate at
120 volt, 60 cycle AC electrical current or as noted on the unit. To start clipper
move switch button to the ON position marked “I” on the power switch, to stop,
move switch button back to original position. After using your Andis clipper, rewrap
cord and store in a safe place.
A B C D
OIL
CLIPPING GUIDE
Description Clipping Direction
Approximate Length of Cut
Blade set to
shortest cut
Blade set to
longest cut
Standard Andis Blade
With hair grain
Against hair grain
1/16” (1.6 mm)
1/32” (0.8 mm)
3/16” (4.8 mm)
1/8” (3.2 mm)
1/16” Attachment Comb
With hair grain
Against hair grain
3/16" (4.8 mm)
3/32" (2.4 mm)
5/16" (7.9 mm)
5/32" (4.0 mm)
1/8” Attachment Comb
With hair grain
Against hair grain
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/4” Attachment Comb
With hair grain
Against hair grain
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
3/8" Attachment Comb
With hair grain
Against hair grain
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
1/2" Attachment Comb
With hair grain
Against hair grain
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
5/8" Attachment Comb
With hair grain
Against hair grain
3/4" (19.0 mm)
5/8" (15.9 mm)
1" (25.4 mm)
7/8" (22.2 mm)
3/4" Attachment Comb
With hair grain
Against hair grain
7/8" (22.2 mm)
3/4" (19.0 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
7/8" Attachment Comb
With hair grain
Against hair grain
1" (25.4 mm)
7/8" (22.2 mm)
1-1/4" (31.8 mm)
1-1/8" (28.6 mm)
1" Attachment Comb
With hair grain
Against hair grain
1-1/8" (28.6 mm)
1" (25.4 mm)
1-3/8" (34.9 mm)
1-1/4" (31.8 mm)