EasyManuals Logo

Andis RBC User Manual

Andis RBC
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
15. Do not disassemble charger. Incorrect reassembly may result in a risk of
electric shock or fire. When repair is required, send or take it to an Andis
Authorized Service Station.
16. The battery in this clipper is designed to provide maximum trouble-free life.
However, like all batteries, it will eventually wear out. Do not disassemble
battery pack and attempt to replace battery.
17. Batteries can be harmful to the environment if disposed of improperly. Many
communities offer recycling or battery collection. Contact your local
government about disposal practices in your area.
18. When discarding old batteries, cover battery terminals with heavy duty
adhesive tape to prevent short circuits. WARNING: Do not attempt to
destroy or disassemble battery pack or remove any of its components.
Also, never touch both terminals with metal objects and/or body parts, as
short circuit may result. Keep away from children. Failure to comply with
these warnings could result in fire or serious injury.
19. Keep the appliance dry.
SAVE THESE INSTRUCTIONS
Please read the following instructions. Give this fine precision built instrument the care
it deserves, and it will give you years of service.
THIS APPLIANCE IS INTENDED FOR TRIMMING PURPOSES ONLY.
BEFORE USING YOUR CLIPPER
Plug cord into electrical outlet, operate 100-240 volt, 50 cycle AC electrical current or as noted on unit.
UNIVERSAL AC/DC POWER ADAPTER
The unit/charging stand may be equipped with a universal AC/DC power adapter. Three interchangeable
input plugs are included for use in most countries around the world (Diagram A).
REMOVING INPUT PLUG:
1. Unplug AC/DC power adapter from wall outlet.
2. While pressing down on button located on input plug, gently push
up on plug until it releases from power adapter (Diagram B).
REPLACING INPUT PLUG:
1. To replace input plug, align ribs on the AC/DC power adapter with
slots on input plug.
2. Gently push input plug into power adapter until it snaps into place
(Diagram C).
3
Europe Plug
Generally used in Continental Europe
SAA Plug
Generally used in Australia
UK Plug
Generally used in Great Britain
Diagram A
PUSH
Diagram B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Andis RBC and is the answer not in the manual?

Andis RBC Specifications

General IconGeneral
BrandAndis
ModelRBC
CategoryElectric Shaver
LanguageEnglish

Related product manuals