To Next Page
E
Erin RobinsonAug 12, 2025
How to fix an Andres Industries Thermal camera that won't turn on?
- RRenee StokesAug 12, 2025
If your Andres Industries Thermal camera won't switch on or the OLED display remains dark, here's what you can check: * **Battery:** Ensure the battery is correctly polarized or try inserting a fresh battery. * **Screen Brightness:** Use button 1 to increase the screen brightness. * **Power On/Off:** If the device was previously switched off by pressing a key, press and hold key 4 to switch it on. * **Video Mode:** If the device is in Video mode PAL or NTSC, press button 1 for 7 seconds.
General