Andrew James Kettle - Appliance Components Illustration; Using the Appliance; Before First Time Use; Boil-Dry Protection

4
Appliance components illustraon
Lid
Spout
Body
Indicator
Power
base
Open lid
buon
Handle
Water gauge
Switch
Before rst me use
 Clean the kele before rst me use by boiling a full kele of water twice and
then discarding the water. Wipe the surface with a damp cloth.
Please note: MAX capacity 1.7L
5
Using the appliance
1. Remove the kele from the power base and open the lid by pressing the lid
buon.
2. Place the kele under a running tap and ll to above the minimum and below
the maximum mark.
3. Posion the kele on the power base.
4. Connect the appliances plug to the electrical supply and switch the appliance on.
5. Turn the keles switch on. The light will indicate that the appliance is now on.
6. Once the appliance has boiled the kele will automacally ick o. You can
cancel the boiling at any point by ipping the switch up.
7. Li the kele from the power base and pour the water from the kele.
Boil-dry protecon
If you aempt or accidentally boil the kele without water the boil-protecon
mechanism will automacally switch the appliance o.
Cleaning and maintenance
 Disconnect the appliance before beginning cleaning.
 Do not immerse the power cord or base of the appliance in water or liquid for
any reason.
 Wipe the body of the appliance with a damp cloth or cleaner. Do not use
abrasive materials to clean the appliance.
 Always unplug the appliance when it is not in use.