Need help?Do you have a question about the Anetic Aid AT4 and is the answer not in the manual?
General| Type | Operating Table |
|---|---|
| Model | AT4 |
| Manufacturer | Anetic Aid |
| Power Supply | 230V AC |
| Battery Backup | Yes |
| Length | 2100 mm |
| Width | 50 cm |
| Lateral Tilt | 20° |
| Backrest Range | 0° to 90° |
General safety advice and warnings for the user and patient.
Specifies the qualified personnel for operating the tourniquet.
Classifies the device according to medical device directives.
Information on compatible cuffs and hoses.
Location and importance of serial number for service.
Key warnings regarding pressure, duration, and handling.
Precautions for operation, maintenance, and cleaning.
Potential adverse effects like tissue necrosis from improper use.
Explains symbols on the AT4 tourniquet control panel.
Explains CE Mark, Read Instructions, and Caution symbols.
Instructions for installing the fuse and charging the device battery.
Guidance on connecting and storing the tourniquet hoses.
Identifies and labels key parts of the AT4 Tourniquet system.
Steps to prepare the AT4 for use, including charging and hose connection.
How to turn on, set pressure, inflate, and deflate the tourniquet.
Specific instructions for using the tourniquet in IVRA mode.
Explains various alarms and indicators for maintenance, battery, and operation.
Specifies temperature, humidity, and pressure for operation and storage.
Information on electromagnetic compatibility and interference reduction.
Procedures and precautions for cleaning and disinfecting the device.
Daily checks for O rings, cuffs, and hoses for wear or damage.
Recommendations for periodic servicing, electrical safety testing, and battery replacement.
To Next Page
