EASY SETUP
Prepare one hardboard
Thickness: 6 mm (1/4’’)
Minimum dimensions:
33 cm (13’’) x 33 cm (13’’)
Maximum dimensions:
equal to the mattress size
IN THE BOX:
NOT INCLUDED:
1 AC AdapterNursery Unit Sensor Pad
Miniature
Philips
Screwdriver
4 AAA
Alkaline
Batteries
IMPORTANT
The hardboard
must be larger
than Sensor Pad
surface area.
STEP 1 – INSTALL APPLICATION
1) Scan QR Code with your smartphone
OR Search for Angelcare baby monitor
in your App Store.
2) Open application and accept
PUSH Notifications.
3) Sign up and create your account.
STEP 2 - INSTALL NURSERY UNIT
1) Plug in your Nursery Unit.
2) Press Nursery Unit Power Button
and wait for activation sound (30 seconds).
3) Rotate Camera Button to top position.
+
4X
E
N
OR
Shortly after signing up, Angelcare
will send you a automatically generated
password by email.
Power light will turn from white to red
and from red to white until a twinkling sound
confirms complete activation.
1.1
1.3
2.1
2.3
2.2
03Bmf2_QuickInstallation_AC1200_EN_11807.indd 1 2013-08-22 9:46 AM
To Next Page
Need help?
General