Need help?Do you have a question about the Anglian Water Water Display and is the answer not in the manual?
General| Brand | Anglian Water |
|---|---|
| Model | Water Display |
| Category | Measuring Instruments |
| Language | English |
Explains the function of the water display device, which shows meter readings and water usage in real time.
Details the information provided by the display, including current usage, cost, historical data, and household comparisons.
Guides on how to connect the power adapter and turn on the water display unit.
Instructions on setting the number of household occupants, which influences default budget settings.
Explanation of the signal strength indicator and troubleshooting tips for poor reception.
Procedure to verify the correct water meter is paired with the display and check the meter serial number.
Step-by-step instructions on how to access and view the current water meter reading on the display.
Explains how to navigate through different time periods (Today, This Week, etc.) and change display modes.
Interpreting the drip indicator which shows water flow rate and usage.
Understanding the beaker graphic which visually represents the daily water budget and usage.
Explains how puddle graphics indicate the percentage by which the water budget has been exceeded.
Instructions for using the stopwatch feature to measure water consumption of specific appliances.
How fish graphics compare current usage to previous periods and indicate budget status (under/over).
Information on the leak alert function, its trigger conditions, and how to acknowledge the warning.
Introduction to setting budgets by volume (litres) or cost, including predefined and custom options.
Step-by-step guide to setting a daily water budget based on litres, user type, and occupants.
Instructions for setting a custom daily water budget in litres based on household usage.
Guide to setting a monthly water budget based on cost, typically aligned with direct debit amounts.
Instructions for adjusting or viewing the device's date and time settings.
How to update the water and wastewater charges reflected on the display.
Specific instructions for customers paying only for water services to set related charges to £0.00.
Troubleshooting steps for weak or no signal reception between the meter and the display.
Guidance on what to do if the meter serial number displayed is incorrect.
Explanation for flashing data indicating incomplete or new information periods on the display.
Explanation for increased 'red fish' (over budget) indicators on weekends due to consistent daily budgets.
Advice on setting a custom budget for households with more than five occupants.
Provides links to definitions of user types, leak checks, meter reading guides, and water saving advice.
Link to find a list of plumbers approved by Anglian Water for related services.
To Next Page