Anker A8327 - User Manual

f
01
f
02
f
03
f
04
f
05
f
06
Safety Instructions
• Do not drop, knock, or shake the device.
• Do not disassemble. Do not attempt to open the device.
• Keep the device dry and away from all types of liquids or moisture that will corrode the
electronic circuits. If the device gets wet, dry it immediately.
• Avoid extreme temperatures.
• Do not use outdoors during thunderstorms.
• Use original or certified cables only.
• Do not use any corrosive cleaner / oil to clean.
The device should be charged at least once a month to preserve battery life.
What’s Included
Anker Bluetooth
Transmitter
User Manual
User Manual
Soundsync Bluetooth Transmitter
3.5 mm Audio
Adapter
micro USB
Cable
3.5 mm Audio
Cable
At a Glance
1
Multi-function Button
5
Multipoint Connection LED Indicator
2
LED Indicator
6
Volume Down
3
3.5 mm AUX Input
7
Volume Up
4
Micro USB Charging Port
• Charge the Bluetooth Transmitter before first use.
• If Soundsync freezes, press and hold the multi-function button, insert the
Micro USB cable to start charging, then restart Soundsync.
LED Indicator Guide
Flashing blue twice Power on
Flashing red twice Power o
Flashing red and blue alternately Bluetooth pairing mode
Steady blue
Connected to a device / Connected to two devices
simultaneously
Flashing blue once every 2
seconds
Disconnected from a device
Flashing blue once every second Reconnected to a device
Steady blue (LED indicator
and Multipoint connection LED
indicator)
Two devices are connected simultaneously
Flashing red and blue alternately Pairing deleted
Using Your Soundsync
Turn on / o
3S
3S
3S
3S
ON Press and hold for about 3 seconds
OFF Press and hold for about 3 seconds
Connect Soundsync to a Bluetooth Device
3S
3S
x2
1. When Soundsync is turned on, press the multifunction button twice to enter Bluetooth
pairing mode. The LED indicator will flash red and blue alternately.
2. Enable Bluetooth on your Bluetooth headphones or speaker and pair it with Soundsync.
When successfully paired, the LED indicator will turn blue.
3. Connect Soundsync to your device using the provided 3.5 mm audio cable.
USER MANUAL
Soundsync Bluetooth Transmitter
For FAQs and more information, please visit:
Product Number: A8327
Soundsync Bluetooth Transmitter
5100500XXXX V01

Summary

Safety Instructions

General Safety Precautions

Covers avoiding physical damage, moisture, extreme temperatures, and using proper cables.

Battery Maintenance Reminder

Advises charging the device at least once a month to preserve battery life.

Whats Included

At a Glance

Device Components and Controls

Identifies and labels the multi-function button, LED indicators, AUX input, and charging port.

Initial Setup and Troubleshooting Tip

Instructions for initial charging and handling device freezes.

LED Indicator Guide

LED Status Meanings

Explains the meanings of various LED color and pattern combinations for status indication.

Using Your Soundsync

Turn On and Off Procedure

Details the steps for powering the device on and off using the multi-function button.

Connect Soundsync to a Bluetooth Device

Connect Soundsync to Two Devices Simultaneously

AUX Mode Operation

Charging Your Soundsync

Charging Status Indicators

Describes the LED lights indicating low battery, charging, and full charge status.

Charging and Storage Recommendations

Provides advice on using the correct cable and storing the device properly.

Specifications

Declaration of Conformity

FCC Statement

Outlines the device's compliance with FCC rules and operating conditions.

Radiation Exposure Statement

Anker A8327 Specifications

General

Brand	Anker
Model	A8327
Category	Transmitter
Language	English