This icon appears when a port is overloaded. The port will be turned o
ff
to avoid any damage. Please remove the device causing overload.
High-Temperature Alert:
When this icon shows, stop using the power station and let it cool down until the icon disappears.
USB-A Output
AC Charge and Voltage Frequency
Remaining Battery for Power Station
Estimated Time to Fully Recharge
Estimated Time for Battery to Deplete
Current Input Power
Current Output Power
Recharging Your Power Station
AC Recharging (750W Max)
Recharge your power station by connecting to a wall outlet with the AC charging cable.
UltraFast Recharging (1100W Max)
The UltraFast charging needs to be activated from the Anker app home page.
Regular charging provides the best protection for the battery. We recommend using UltraFast charging when necessary.
Solar Panel Recharging (300W Max)
Recharge your power station with a maximum solar input of 300W by connecting up to two solar panels, as shown in the
fi
gure, with a solar charging cable.
DC Recharging
Recharge your power station by connecting to a DC output port with the DC charging cable.
When your portable power station only has 1% battery remaining, the "Remaining Battery" indicator will
fl
icker to remind you to recharge.
Powering On / O
ff
Press the main power button for 3 seconds to turn your power station on or o
ff
.
When the "Remaining Battery" indicator shows on the LCD screen, your power station is ready to charge devices.
When powered on, press the main power button to turn the screen on or o
ff
.
The screen will automatically turn o
ff
after 30 seconds of lighting up. The auto-o
ff
time can be set in the Anker app.
The power station will power o
ff
automatically if the output buttons are turned o
ff
and no power loads are detected for 12
hours. The standby duration can be set in the Anker app.
Powering Your Devices
AC Charging
Press the AC outlet button and connect your device with the AC output ports.
The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning o
ff
the power station if no plug is detected for more than 15 minutes.
USB Charging
Connect your devices to the USB ports.
To Next Page
Loading...
