Anker Soundsync A3341 - LED Status Indicators Explained

04
EN
Flashing blue (TX
mode)
Connected to a device
Note: the status indicator flashes
dierently according to the operation
status.
Steady green (for
5 seconds)
Connected to two devices
Flashing blue(4 times
in every 10 seconds)
Operation status: AptX HD
Flashing blue(3 times
in every 10 seconds)
Operation status: AptX low latency
Flashing blue(2 times
in every 10 seconds)
Operation status: AptX
Flashing blue(once in
every 10 seconds)
Operation status: SBC
Flashing blue(6 times
in every 10 seconds)
Operation status: AAC
Turn o your
Soundsync, and wait
for 3 seconds. Slide
switch to TX or RX then
restart your Soundsync.
Clear present pairing list