Scan the QR code to download NEO app at
App Store or Google Play. You can also
search keyword “ANKUOO” at App Store or
Google Play to download NEO app.
Connect your smart device to local Wi-Fi
network and launch NEO app. Find “add
new device”in the menu.
2
1
Make sure your smart device and NEO Switch
are in the same Wi-Fi network. The connecting
process takes about 15-120 seconds, depending
on your network condition and the length of
Wi-Fi password.
Plug NEO Switch into a power outlet, then
press ON/OFF button for 5 seconds and
release it. The Wi-Fi indicator light will flash
quickly. NEO Switch is now ready for
synchronization.
Hard Reset: This procedure allows you to do a
hard reset directly from your NEO.
P.W
WiFi
ROUTER SSID
show password
To Next Page
Loading...