ANNIN FLAGMAKERS 395

To Previous Page

Assembly of 3 Piece Fiberglass Flagpole

Page 2

3 Sections of Pole

1 Ground Sleeve

1 Ground Collar

1 Fairlead

1 Ball Finial

1 Cleat, 2 Screws, 2 Rubber Anchor Nuts

1 Halyard

2 Snap Hooks

Ground Collar over top of pole

prior to the finial being placed.

White cap & screw

Cleat Holes

Cleat will fix joint together

ASSEMBLY INSTRUCTIONS FOR 20FT

3-SECTION FLAGPOLE (continued)

Villager III (Item# 395)

1. insert rubber anchor nuts

2. screw cleat on tightly so that

rubber anchor nuts are

rmly compressed

To x cleat at bottom joint

To view installation video go to: https://www.youtube.com/user/Anninvideo

ANNIN FLAGMAKERS 395 - Page 2