Need help?Do you have a question about the annke N44PI and is the answer not in the manual?
General| Brand | annke |
|---|---|
| Model | N44PI |
| Category | Network Hardware |
| Language | English |
Details FCC compliance, limits, and operating conditions for digital devices.
States compliance with EU directives like EMC, RoHS, and WEEE.
Confirms compliance with Canadian ICES-3 (B)/NMB-3(B) standards.
Defines the severity and potential consequences of warnings and cautions.
Emphasizes user responsibility for secure password configuration.
Provides guidance on safe operating environment, device handling, and power connections.
Recommends proper battery handling and the use of UPS for device stability.
Provides essential guidelines for the proper installation of the NVR.
Step-by-step instructions for installing a hard disk drive into the NVR.
Introduces the components and indicators on the NVR's front panel.
Lists and describes each numbered component found on the rear panel.
Compares specifications like video input, network bandwidth, and resolution for different NVR models.
Details storage used per hour for various bit rates.
Presents a visual representation of the NVR's menu hierarchy.
Explains the correct methods for starting up and shutting down the NVR.
Outlines the initial steps required to power on and begin using the NVR.
Details the icons used in Live View mode to show camera status and issues.
Explains why cameras need to be added and what conditions must be met beforehand.
Explains how cameras are detected and displayed in the camera list.
Explains the security status indicators for added IP cameras.
Defines the meaning of various icons used in the IP camera management interface.
Stresses the importance of HDD initialization before starting recording.
Introduces instant and all-day recording as primary record types.
Details using the live view toolbar to initiate playback of recent recordings.
Explains accessing playback through the main menu and interface.
Guides users on accessing the video export interface for backups.
Explains how to choose specific files for backup from the export interface.
Guides on setting up detection zones and enabling motion detection.
Describes how to set a schedule for motion detection recording.
Details the necessary network configuration for sending email alerts.
Guides on sending a test email and saving the final email settings.
Explains how to access and control the NVR using a web browser.
Provides steps for accessing the NVR's web interface and logging in.
Describes the main components of the live view interface in the web browser.
Guides users to the schedule settings interface for configuring recording.
Explains how to set recording times and types for each day of the week.
Details how to adjust advanced settings like pre-record and stream type.
Describes the playback interface elements and operational controls.
Details how to download and install mobile apps for NVR access.
Details the process of registering the device using HiDDNS.
Explains how the camera number setting reflects the connected cameras.
Guides users on installing the iVMS-4200 client software.
Explains how to activate an NVR device within the client software.
Explains how to view live camera feeds using the client software.
To Next Page
