Anritsu MG369 C Series User Manual

Command Directory 3-4 Commands
MG369xC GPIB PM PN: 10370-10374 Rev. F 3-125
XL6 <value> <unit>
Description: Opens the L6 parameter.
Permits setting the L6 parameter. The power level setting is determined by the power
level range of the particular MG369xC model.
Functional
Category: PARAMETER ENTRY
Value: Power level range of the MG369xC model
Units: DM (log), VT (linear)
Output Command: OL6 returns the L6 power level (in dBm when in log mode; in mV when in linear mode)
to the controller.
Related
Commands: LOG, LIN, PU0, PU1, PU2
Front Panel Key: Level | Level | Level Control > | highlight L6, then press Edit Selected
XL7 <value> <unit>
Description: Opens the L7 parameter.
Permits setting the L7 parameter. The power level setting is determined by the power
level range of the particular MG369xC model.
Functional
Category: PARAMETER ENTRY
Value: Power level range of the MG369xC model
Units: DM (log), VT (linear)
Output Command: OL7 returns the L7 power level (in dBm when in log mode; in mV when in linear mode)
to the controller.
Related
Commands: LOG, LIN, PU0, PU1, PU2
Front Panel Key: Level | Level | Level Control > | highlight L7, then press Edit Selected
XL8 <value> <unit>
Description: Opens the L8 parameter.
Permits setting the L8 parameter. The power level setting is determined by the power
level range of the particular MG369xC model.
Functional
Category: PARAMETER ENTRY
Value: Power level range of the MG369xC model
Units: DM (log), VT (linear)
Output Command: OL8 returns the L8 power level (in dBm when in log mode; in mV when in linear mode)
to the controller.
Related
Commands: LOG, LIN, PU0, PU1, PU2
Front Panel Key: Level | Level | Level Control > | highlight L8, then press Edit Selected

Anritsu MG369 C Series Specifications

General

Brand	Anritsu
Model	MG369 C Series
Category	Portable Generator
Language	English