EasyManua.ls Logo

ansio 1308 - Ventilation and Obstruction; Handling Malfunctions; Cautions and Warnings; Combustible Material Clearance

ansio 1308
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
ANSIO 1308 (M21v01) support@ansio.co.uk 4
in this condition should be replaced by a qualified electrician. The
outlet should not be covered by a curtain or a drape etc. to prevent
fire hazards.
Do not insert fingers or foreign objects to enter any ventilation as it
may cause an electric shock, fire and can damage the heater.
Do not block or tamper the heater in any manner while it is in
operation. Do not place the heater on soft surfaces like a bed as the
openings may become blocked.
In case of overheating or any other malfunctioning of the heater,
please contact us for further assistance.
CAUTION:
1. Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable
people are present.
2. Do not use the heater outdoors.
3. Always place the heater in a flat, even surface.
4. DO NOT run the power cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange the power cord away from
traffic area and where it will not be tripped over.
5. Keep combustible materials, such as bedding, pillows, furniture,
papers, clothes and curtains at least 3 feet (0.9 m) away from the
heater.
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT
COVER THE HEATER.
NOTE:
Before using always check and ensure that the power cord is
undamaged.

Related product manuals