12
permanently in conjunction
with a travel adapter.
Only use the product in dry
indoor areas and protect it
from moisture.
The product complies with
protection class II. It fea-
tures reinforced insulation and
thus requires no protective
grounding.
PRODUCT DESCRIPTION (SEE PAGE 2)
A: AA/AAA charging compartments
B: 9V charging compartment
C: Discharge button
D: LC display
OVERVIEW OF FUNCTIONS
Quick charger for 1-4 NiMH batteries of the sizes Micro AAA /
Mignon AA or 1-2x AAA/AA and one 9V E-Block NiMH
Microprocessor controlled charging with single cell monitoring
Automatic start of charging and charging current adjustment
after insertion of the batteries with correct polarity
Status display by a 4-segment LCD symbol per charging bay
Defective battery detection
Worldwide usable (100-240V AC)
For round cells:
Discharge function selectable
Intelligent "PERFECT 7 CHARGING" function (SEE PAGE 2):
1. Capacity quick test: Residual capacity is determined
before charging begins and displayed for 5 seconds
2. Gentle pre-charging: Weak or deeply discharged battery
is pre-charged with lower current if necessary
3. Battery analysis: Battery behavior is analyzed and
evaluated to determine whether it is still reliably usable
or defective
4. Quick charge: Battery is charged at maximum current
5. IQ switch-off: Intelligent monitoring of the battery for
reliable charging and multiple protection against
overcharging
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
To Next Page
Loading...
Need help?
General
