AUTOPULSE IQ-396X Programming Doc. 50402:B 07/22/96 23
STATUS CHANGE PRESS:1=DISABL 2=SENSITIV
3=CLR VER 4=CLR HIST 5=TIME 6=WALK TEST
Clear Verification Counters
This option lets you clear all verification tally counters for detec-
tors selected for alarm verification. From the Status Change
screen, select <3> to display the Clear Verification screen:
The Clear History option lets you clear the entire history file from
memory. Select <4> from the Status Change screen to display the
Clear History screen:
STATUS CHANGE PRESS:1=DISABL 2=SENSITIV
3=CLR VER 4=CLR HIST 5=TIME 6=WALK TEST
The Time/Date option lets you set the time and date for the system
clock. Select <5> from the Status Change screen to display the
Time/Date screen:
From the screen, you can do the following:
Press Enter to clear all verification counters and return to the
Status Change screen; or
Press Esc to return to the Status Change screen without clearing.
Clear History Screen
From the Clear History screen, you can do the following:
Press Enter to clear the contents of the history file and return to
the Status Change screen; or
Press Esc to return to the Status Change screen without clearing.
The first digit flashes until you change the value or press Enter. To
set the time and date, follow the instructions in the table.
Clear the History File
STATUS CHANGE PRESS:1=DISABL 2=SENSITIV
3=CLR VER 4=CLR HIST 5=TIME 6=WALK TEST
Set the Time and Date
3
Clear Verification Screen
PRESS ENTER TO CLEAR VERIFICATION COUNTS
OR ESCAPE TO ABORT
PRESS ENTER TO CLEAR HISTORY FILE
OR ESCAPE TO ABORT
CHANGE TIME/DATE
11:40A TUE 06/20/95
Time/Date Screen
5
4
Blinking first digit
...oT...sihtoD
etaddnaemitehtegnahC
seulav
ehtnosyekciremunehtmorfseulavtupnI
.dapyek
)MP(Pro)MA(AegnahC
sserP
L ro M
yadehtegnahC
sserP
L ro M
tigidrehtonaotevoM
sserP
G
etaddnaemitehtevaS
nruterdnasserP
R
Changing the Time and the Date
To Next Page
Loading...
