Ansul AUTOPULSE IQ-396X - Voice Alarm Systems (VAS); VAS Overview and Key Features; VAS Integration and Preparation

AUTOPULSE IQ-396X Programming Doc. 50402:B 07/22/96 25
From the Status Change screen, press <6>; then press <Enter>.
The control panel displays the Walk Test screen:
To use the control panel in Walk Test, follow these instructions:
...oT...sserP
edomtseTklaWotnilenaplortnocehttup
C
sutatSehtotnruterdnatsetklawapots
neercsegnahC
S
Walk Test, continued
How to do a Walk Test
Walk Test Screen
When finished with a Walk Test, do the following:
1) Press <Esc> to exit Walk Test mode to return the control panel
to normal operation.
2) Notify the building owner/operator, fire department, and other
persons that testing is complete and is restored to normal
operation.
3) View the history file to check the results of the Walk Test.
Finishing a Walk Test
WALK TEST PRESS ENTER TO START
ESCAPE TO ABORT
WALK TEST PRESS
ESCAPE TO ABORT
Display in Walk Test
Entering and Exiting
Walk Test Mode