System Components
UL EX-4510 2-1-12 Page 1-3.5
REV. 1
Description
The Pressure-Operated Stackable Actuator (Part No.
428566) is necessary when pneumatic actuation is required
on any selector valve. This actuator is installed on top of
the selector valve and a 1/4 in. pressure line must be
attached to the 1/8 in. pressure port on the side of the actu-
ator. The actuator must be manually reset.
Installations which utilize the pressure-operated stackable
actuator must incorporate a Selector Valve Pneumatic
Actuation Line Kit (Part No. 436127) in the directional/
selector valve actuation line for each actuator. See
Component Page 1-3.8 for kit details.
Pressure-Operated Stackable Actuator
006036
2.309 IN.
(59 mm)
2.926 IN.
(74 mm)
1/8 IN.
PRESSURE
PORT
1 1/8 – 18 UNEF
1 1/8 – 18 UNEF
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-2001065-01
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com
To Next Page
Loading...